sub3

How to replace the rear windshield?

Release time:

2023-05-25

1. Remove the luggage compartment cover, rear upright trim on both sides, and rear window sill. 2. Cut off the window antenna data cable A and the rear window defogger data cable B. 3. If reinstalling the old rear window, flip over the car window and body and mark the positioning with a marker pen. 4. Loosen the lock catch and pull off the rear side of the roof lining A. Be careful not to bend the roof lining too much, otherwise it may wrinkle or break.
If the entire process of windshield replacement is not assembled in a standardized manner, the glass adhesive and glass on both sides of the car windshield cannot be tightly attached, which can have an impact on the car. When driving, the gap between the windshield and the body of the car will be filled with air, causing the noise inside the car to increase. When driving on bumpy roads, you can also feel the sound of shaking and crashing in front of the car. The use of automotive glass water for car windshields is crucial. Nowadays, there are various types of automotive glass water sold in the domestic market, but the key is divided into three types: summer automotive glass water, winter antifreeze automotive glass water, and effect antifreeze automotive glass water.

Latest News

How to install an electric car windshield?

Organize the handle section, cover all handles with a windproof cover without leaving any gaps, then tie them tightly and secure them.

2023-05-25

What is the installation method for the rear windshield of a car?

Remove the black protective strip around the windshield, and then remove the protective cover under the windshield; 2. Slowly scrape off the black sealant stuck on the car until the color of the iron frame is exposed; 3. Apply polyurethane sealant to the frame of the car windshield; 4. Support the windshield on a small support, and then apply a layer of sealant around the windshield to stick the black protective strip. Automotive windshields are mainly made of laminated tempered glass and laminated area tempered glass, which can withstand strong impact forces.

2023-05-25

Maintenance of Automotive Glass

The main reason for car glass freezing is that after people leave the car, there is still hot air left in the car, making the car glass still hot. When snowflakes fall on the glass, they first melt; During the melting process of snowflakes, the temperature inside the car gradually decreases.

2023-05-25

Technical Development of Window Glass

With the development of automotive glass technology, new windshield technologies have also emerged one after another. For example, it can reduce the impact of sunlight on the interior of a sedan and improve the level of comfort.

2023-05-25

Classification of car window glass

which can only be used at locations other than the front windshield, but LA, LB The Z symbol glass can be applied to all glass positions in automobiles.

2023-05-25

< 12 >