sub3

How to replace the rear windshield?

Release time:

2023-05-25

1. Remove the luggage compartment cover, rear upright trim on both sides, and rear window sill. 2. Cut off the window antenna data cable A and the rear window defogger data cable B. 3. If reinstalling the old rear window, flip over the car window and body and mark the positioning with a marker pen. 4. Loosen the lock catch and pull off the rear side of the roof lining A. Be careful not to bend the roof lining too much, otherwise it may wrinkle or break.
If the entire process of windshield replacement is not assembled in a standardized manner, the glass adhesive and glass on both sides of the car windshield cannot be tightly attached, which can have an impact on the car. When driving, the gap between the windshield and the body of the car will be filled with air, causing the noise inside the car to increase. When driving on bumpy roads, you can also feel the sound of shaking and crashing in front of the car. The use of automotive glass water for car windshields is crucial. Nowadays, there are various types of automotive glass water sold in the domestic market, but the key is divided into three types: summer automotive glass water, winter antifreeze automotive glass water, and effect antifreeze automotive glass water.

Latest News

What are the glass materials used for car windows?

The windshield used to be the main part of car glass. As early as more than 80 years ago, glass was installed on T-cars produced by Ford in the United States. At that time, flat glass was installed at the front of the carriage, saving drivers from the hardships of wind and rain. In the decades since then, the glass industry has gradually set foot in the automotive industry, creating a variety of safety glasses - laminated glass, tempered glass and regional tempered glass, which have greatly improved the performance of automotive glass.

2023-05-25

How to replace the rear windshield?

Remove the luggage compartment cover, rear upright trim on both sides, and rear window sill. 2. Cut off the window antenna data cable A and the rear window defogger data cable B. 3. If reinstalling the old rear window, flip over the car window and body and mark the positioning with a marker pen. 4. Loosen the lock catch and pull off the rear side of the roof lining A. Be careful not to bend the roof lining too much, otherwise it may wrinkle or break.

2023-05-25

The function of car windshields

Laminated glass refers to a transparent adhesive plastic film stuck between two or three layers of glass, which combines the strength and toughness of the plastic with the hardness of the glass, increasing the glass's resistance to breakage.

2023-05-25

The Use of Automotive Glass Water

Some car owners believe that glass water is just for cleaning the front windshield, as long as it can clean and remove dirt. The washing powder water and detergent used in daily life also have this effect, so they mix a little water with detergent, detergent, laundry detergent, etc. to replace the specialized glass water, feeling that this is cheap and worry free; Some car owners directly replace glass water with clean water. In fact, this approach has certain hidden dangers.

2023-05-25

Maintenance methods for car windshields

There are various types of glass water sold in the domestic market, but they are mainly divided into three types: summer glass water, winter antifreeze glass water, and special effect antifreeze glass water. Among them, the glass water used in summer is mainly used to remove flying insect residues on the mirror surface.

2023-05-25

< 12 >